Fan coil thermostat
Mycond Block

Having the same glossy design, as its heating floor version, this thermostat becomes an addition to your interior. It can control not only heating, but cooling via fan coil units. This smart device enable you to create more sophisticated schedules for every day of the week, and give you complete control over your HVAC system, even when you’re away from home

New product Edit Clone product

Control of the heating operation is carried out using sensors: built-in — the temperature sensor of the air environment in the room.
The possibility of programming the operating modes of the heating equipment for all days of the week provides savings on heating costs of up to 30 percent or more. Fan coil thermostat Mycond Block provides control of the fan and fan coil valve drives.
Purpose: control of fan coils with a 220V AC motor or in-floor convectors with the appropriate control module.

Control of the fan coil thermostat Mycond Block

The set parameters of the air temperature are maintained with an accuracy of 1 °C, all settings are carried out using illuminated touch buttons located on the bottom panel.
By programming the weekly mode of operation, separately for working days and separately for weekend days, as well as setting the minimum air temperature for the economical mode for the time when no one is in the rooms, provide savings on heating costs in the amount of more than 30%.

You can control the operation of the thermostat through the Mycond SmartApp mobile application.

Indication of the thermostat

The display of the fan coil thermostat shows:

On/Off network indicators;
configured and current air temperature in the room;
indicators of the active mode of operation — automatic or manual;
indicators of the selected operating mode — cooling, heating or ventilation;
indicators of the day of the week and blocking of the setting buttons;
hour phase indicator during automatic mode;
indicator of the current time of day.

At the bottom of the panel there are touch buttons for setting modes and menu transitions. These buttons are backlit.
With the buttons for automatic mode, you can choose time ranges and the desired air temperature separately for weekdays and weekends.
Adjustments are made according to the sequence outlined in the Installation and Adjustment Instructions.

Benefits

Touch control
Large white display with backlighting
Large font
Body material: fire-resistant plastic
Programmable mode
Freeze and overheat protection
Lockable control buttons
Fan control (3 speeds + Auto)
Valve control
3 operating modes (ventilation, cooling or heating)

Additional modifications :

MODBUS for connection to a building management system or a smart home
0-10 V fan and 24 V operating voltage
Support of 4-pipe systems
Wi-Fi, wireless control via Mycond SmartApp on smartphone

Specifications

Accuracy of measurement ± 1 °C
Adjustable temperature range: 5-35 °C
Power consumption: < 3 W
Error: 1%
Power supply: AC95~240V 50~60Hz
Load: up to 3A
Wi-Fi 802.11b
Dimensions: 86 x 86 x 13.3 mm
Installation box: 60 mm
Operating conditions: operating temperature range from 0 to 45 °C, relative air humidity from 5 to 90%

Installation of the fan coil thermostat Mycond Block

Fan coil thermostat is intended for wall installation in a mounting box and in-wall installation of network wires. The place of installation is chosen away from door and window openings, from heating radiators or areas warmed by the sun.

Fan coil thermostat Mycond Block will help not only provide heat in the house in advance before your arrival, but also significantly save your resources during the heating season.